Flame Boss 400 Kamado – English

VERSION 5.0 | March 31, 2022

WARNING: Important Safety Instructions

It is important for the safety of persons to follow these instructions. Save these instructions. Follow all instructions, as incorrect installation and use can lead to injury or property damage. Flame Boss 400 is intended for use only in dry, outdoor locations. Store the unit indoors in a dry location. If you know or suspect that the Flame Boss controller or power adapter has been submerged in water, do not use the unit. The 12 V DC power to the unit shall be supplied by a properly certified power adapter with SELV / LPS output. Use only the power adapter provided with the unit. Do not allow children to play with a Flame Boss 400. Keep away from children. Flame Boss 400 is not to be used by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge. Do not place or mount a Flame Boss 400 where it is exposed to excessive heat from the grill or smoker.

What’s Included
Downloading the Flame Boss Mobile App
Wifi Indicators
Adapter Installation
Controller Installation
Vent Closure
Probe Placement

What’s Included

FLAME BOSS SMOKER CONTROLLER WITH INTEGRATED BLOWER

12 V DC POWER SUPPLY

PIT TEMPERATURE PROBE

MEAT TEMPERATURE PROBE

ADAPTER PLATES (3) *KAMADO

Download the Flame Boss App

All device configuration, from WiFi setup to meat and pit temperature settings, can be controlled completely from the Flame Boss mobile app for iOS & Android. Keep track of your cooks from anywhere with your mobile or smart home device.

Wifi Indicators

The WiFi status is shown with the following LED indicators:
SLOW BLINKING: Controller is in Access Point mode and NOT connected to the Flame Boss server.
FAST BLINKING: Controller is in Station mode and NOT connected to the Flame Boss server.
SOLID: Controller is connected to the Flame Boss server via cloud connect or to controller via local or direct connect.